Technical Specifications
| Type | Active |
| Peak output power | 1,200 W |
| RMS output power | 300 W |
| Amp class | Class D |
| Max. SPL peak | 126 dB |
| Frequency response | 50 - 20,000 Hz |
| Speaker system | 2-way coaxial system |
| Crossover frequency | 2Â kHz |
| Beam angle | 90° (hor.) / 50° (vert.) |
| Monitor angle | 55 ° |
| Number of inputs | 3 |
| Input connector types | 6.3 mm Jack TRS female |
| Input connector types | XLR 3-pole female |
| Number of outputs | 1 |
| Output connector types | XLR 3-pole female |
| Protection features | Multiband Limiter |
| Protection features | Overheating |
| Protection features | Overload |
| Protection features | Overvoltage |
| Colour | Black |
Inputs
| Number of mic/line inputs | 2 |
| Mic/Line-in connector type | XLR combo socket |
| Number of line inputs | 1 |
| Line-In connector type | 3.5 mm Jack TRS female |
Outputs
| Number of line outputs | 1 |
| Line outputs connector type | XLR 3-pole female |
Signal processing
| Mixer | Yes |
| Audio processing | 3 band EQ (High, Mid, Low) |
| Audio processing | Delay Line |
| Audio processing | Presets |
Bass driver
Tweeter
| Driver size | 1 ' |
| Magnet | Ferrite |
| Voice coil | 1.4 ' |
Mains operation
| Operation voltage | 100Â VÂ AC - 240Â VÂ AC / 50 - 60Â Hz |
| Power supply type | Switched-mode power supply (SMPS) |
| Rated power | 150 W |
| Mains connector | IEC C14 plug male |
| Mains fuse | T4AL/250Â V |
| Fuse replacement | Possible from the outside without opening |
Housing
| Design | Bass reflex |
| Number of handles | 4 |
| Mounting type | M10 flying points |
| Number of mounting points | 6 |
| Flange | 36 mm (0°/5°) |
| Cabinet material | Polypropylene |
| Material thickness | 15 mm |
| Front grille material | Aluminium |
Environmental
| Ambient temperature | 0 - 40 °C |
| Maximum air humidity (non-condensing) | 80 % |
Dimensions & weight
| Width | 375 mm |
| Height | 635 mm |
| Depth | 396 mm |
| Weight | 19.95 kg |
Other properties
| Included accessories | Mains cable |
This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 12 A by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this powered 12' loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 12 A the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 126 dB max. SPL and 1200 W peak performance.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 12 A is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.