Home Studio Acoustics: Acoustic Foam, Absorbers and Microphone Shields
3 min read
Vytautas Gaponovas
Home Studio Acoustics
Many home studio recordings sound “roomy” not because of the gear but because of the room: sound bounces off bare walls, windows and the ceiling. Acoustic treatment helps you record cleaner sound and hear your mix more accurately.
Where to start?
It's important to tell two things apart: acoustic treatment improves the sound inside the room, while soundproofing stops sound from travelling into other rooms. Acoustic foam solves the first problem, but it won't stop sound from reaching the neighbours.
Acoustic foam panels absorb mid and high frequencies, reducing echo and “harshness”. How well they work depends on their thickness: thicker panels absorb a wider range of frequencies.
First reflection points – the side walls between you and the monitors, and the ceiling above your workspace.
Behind the listening position – the rear wall, so reflections don't bounce back to your ears.
In the corners – where low frequencies build up (bass traps).
Behind the vocalist – if you record vocals.
There's no need to cover every wall – a completely “dead” room sounds unnatural. Usually 20–40% of the wall area in the key spots is enough.
Microphone reflection filters
A microphone reflection filter mounts behind the microphone and reduces room reflections when recording vocals. It's a quick fix if you can't treat the room.
Place your studio monitors so that they and you form an equilateral triangle, with the tweeters at ear height. Avoid putting monitors right up against a wall or in a corner. More in the article How to choose speakers.
How to mount acoustic panels
Acoustic panels can be glued with special adhesive, attached with double-sided tape or mounted on frames. In a rented flat, removable solutions are more practical – attach the panels to lightweight boards or frames that are easy to take down.
Frequently asked questions
Does acoustic foam stop sound reaching the neighbours?
No. Foam improves the acoustics inside the room, but soundproofing requires massive structures and an airtight seal.
What thickness of foam is best?
Thin (2–3 cm) panels absorb only high frequencies. 5–10 cm panels work across a wider range, while low frequencies need dedicated bass traps.
How many panels does a small room need?
Usually it's enough to treat the first reflection points, the rear wall and the corners – about 20–40% of the wall area.
Conclusion
Acoustic foam, absorbers and a microphone reflection filter are an affordable way to dramatically improve your home studio recordings. At the Muzi.lt shop we offer acoustic materials and studio equipment.
Want to record vocals, guitar or a podcast? We explain what an audio interface is for, how many inputs you'll need and what to look for when choosing one.
For the stage, the studio or a podcast? We explain the difference between dynamic, condenser and USB microphones, what polar patterns mean and what else you'll…